TM 9--2350--292--20--1
0181 00--2
PAYOUT LIMIT INDICATOR FAILS TO LIGHT WHEN LESS THAN FOUR
WRAPS OF WIRE ROPE ARE LEFT ON DRUM -- CONTINUED
0181 00
C
Is 24 V dc present?
CONTINUED FROM STEP B
no
yes
CONTINUED ON NEXT PAGE
1. Disconnect harness 2W602 lead 10 from
payout limit switch connector.
2. Turn MASTER switch ON
(TM 9--2350--292--10).
3. Place multimeter red lead in harness 2W602
lead 10 connector and black lead to ground.
Check for voltage.
4. Turn MASTER switch OFF
(TM 9--2350--292--10).
Go to Step G.
D
Is continuity present?
no
yes
1. Disconnect harness 2W602 P1 from harness
2W601 J1.
2. Place one multimeter lead in harness 2W602
lead 10 connector to limit switch and other
lead on harness 2W602 P1 pin G. Check for
continuity.
Repair (WP 0290 00) or
replace (WP 0292 00)
harness 2W602. Verify
fault is corrected.
