TM 9--2350--292--20--1
0181 00--5
PAYOUT LIMIT INDICATOR FAILS TO LIGHT WHEN LESS THAN FOUR
WRAPS OF WIRE ROPE ARE LEFT ON DRUM -- CONTINUED
0181 00
I
Is continuity present?
CONTINUED FROM STEP H
no
yes
Place one multimeter lead on terminal junction T13
terminal G and other lead on terminal junction T13
terminal B. Check for continuity.
Replace terminal junction
T13 (WP 0244 00).
Verify fault is corrected.
J
Is continuity present?
no
yes
Place one multimeter lead on terminal junction T13
terminal B and other lead on diode T7 terminal D.
Check continuity.
Repair (WP 0290 00) or
replace (WP 0244 00)
lead 375 from terminal
junction to diode. Verify
fault is corrected.
CONTINUED ON NEXT PAGE
K
Is resistance low with red lead on terminal D and high
with red lead on terminal A?
1. Place red multimeter lead on diode T7 terminal
D and black lead on diode T7 terminal A.
Check resistance.
2. Place red multimeter on diode T7 terminal A
and black led on diode T7 terminal D. Check
resistance.
yes
no
Replace diode T7
(WP 0244 00). Verify
fault is corrected.