Removal - TM-9-2350-292-20-2

AUXILIARY POWER UNIT DUCTING REPLACEMENT (HATZ)

Removal (cont) - TM-9-2350-292-20-2_1015

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
978

TM 9--2350--292--20--2 0621 00--2 AUXILIARY POWER UNIT DUCTING REPLACEMENT (HATZ) -- CONTINUED 0621 00 Removal--Continued NOTE The following steps are performed with the boom raised (TM 9--2350--292--10). 2. Remove three screws (4), three lockwashers (5) and cooling air shield (6) from APU cover (7). Discard lockwash- ers. 3. Remove four screws (8), four lockwashers (9), four flat washers (10) and screen (11) from cooling air shield (6). Discard lockwashers. 4. Remove two screws (12) and two lockwashers (13) securing auxiliary housing (14) to APU cover (7). Discard lockwashers. Figure 340 4 5 6 7 8 9 10 11 12 13 14

Privacy Statement
Press Release
Contact