Removal - TM-9-2350-292-20-2

AUXILIARY POWER UNIT FUEL PUMP AND RELAY BOX MOUNTING BRACKET, OIL DRAIN LINES BRACKET AND WIRING HARNESS BRACKET REPLACEMENT (HATZ)

Installation - TM-9-2350-292-20-2_1044

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
1007

TM 9--2350--292--20--2 0627 00--2 AUXILIARY POWER UNIT FUEL PUMP AND RELAY BOX MOUNTING BRACKET, OIL DRAIN LINES BRACKET AND WIRING HARNESS BRACKET REPLACEMENT (HATZ) – CONTINUED 0627 00 Removal--Continued 3. Remove two screws (9), two lockwashers (10) and isolator mounting bracket (11) from APU. Discard lockwash- ers. 4. Remove four self--locking nuts (12), four screws (13) and resilient mount (14) from brace (15). Discard self--lock- ing nuts. 5. Remove screw (16), lockwasher (17), flat washer (18), brace (15) and wiring harness bracket (19) from APU. Dis- card lockwasher. 6. Remove eight self--locking nuts (20), eight screws (21) and two resilient mounts (22) from bracket (23). Discard self--locking nuts. 7. Remove two screws (24), two lockwashers (25), two flat washers (26) and bracket (23) from APU. Discard lock- washers. 8. Inspect all parts for damage and replace as required. 16 9 10 11 17 18 12 13 14 15 19 20 21 22 23 24 25 26

Privacy Statement
Press Release
Contact