Installation - TM-9-2350-292-20-2

AUXILIARY POWER UNIT WIRING HARNESS 3W704 REPLACEMENT

AUXILIARY POWER UNIT WIRING HARNESS 3W704 REPLACEMENT (HATZ)

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
1050

TM 9--2350--292--20--2 0642 00--2 AUXILIARY POWER UNIT WIRING HARNESS 3W704 REPLACEMENT -- CONTINUED 0642 00 Installation 1. Connect wiring harness 3W704 wire 493 (6) at wire junction of lead 3W705 (7) for high air temperature switch. 2. Connect wiring harness 3W704 wire 420A (4) to low oil pressure switch (5) terminal with screw (3). 3. Connect wiring harness 3W704 wire 420 (1) to oil pressure sending unit (2) terminal. 4. Apply adhesive to all exposed electrical terminals. Figure 346 1 2 4 5 WIRE 420A WIRE 420 WIRE 493 6 7 3 NOTE FOLLOW--ON MAINTENANCE: Install APU wiring harness cable clamps (WP 0592 00) END OF TASK

Privacy Statement
Press Release
Contact