Removal - TM-9-2350-292-20-2

SMOKE GRENADE LAUNCHER WIRING HARNESS ASSEMBLY 1W112 REPLACEMENT

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
1178

TM 9--2350--292--20--2 0673 00--2 SMOKE GRENADE LAUNCHER WIRING HARNESS ASSEMBLY 1W112 REPLACEMENT -- CONTINUED 0673 00 Removal--Continued 3. Cut tie--down strap (5) from wiring harness assembly 1W112 (4). Discard tie--down strap. 4. Remove two screws (6) and two terminal lugs (7) from cable clamp (8). 5. Slide braided wire (9) from wiring harness assembly 1W112 (4), remove two terminal lugs (7). Discard terminal lugs. 6. Loosen cable clamp (8). 7. Remove screw (10) and clamp (11) from wiring harness assembly 1W112 (4). 8. Pull wiring harness assembly 1W112 (4) through cable clamp (8) and bulkhead into vehicle. 9. Disconnect wiring harness assembly 1W112 (4) from wiring harness 4W108 (12). 10. Inspect parts for damage and replace as required. Figure 364 5 6 7 8 9 10 11 12 4 7

Privacy Statement
Press Release
Contact