TM 9--2350--292--20--2
0371 00--1
BRAKE HYDRAULIC CYLINDER REPLACEMENT (NEW CONFIGURATION
WITH BRAKE MODULATION)
0371 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Torque wrench (item 2, WP 0717 00)
Spanner wrench (item 47, WP 0717 00)
Materials/Parts
Dust protective plugs (2) (item 12, WP 0716 00)
Safety goggles (item 93, WP 0716 00)
Wiping rags (item 7, WP 0716 00)
Preformed packing (item 22, WP 0718 00)
Lubricant (Item 51, WP 0716 00)
Equipment Conditions
Vehicle parked on a level surface with tracks blocked
and brakes released (TM 9--2350--292--10)
Subfloor plates #13 and #16 removed (WP 0454 00)
References
TM 9--2350--292--10
WARNING
WARNING
Do not work on hydraulic lines or fittings when system is
pressurized. Hydraulic fluid under pressure can cause
personnel injury. Depressurize brake system by stepping
on the brake pedal several times to bleed off the hydrau-
lic pressure. Make sure brake pressure gauge indicates
zero.
CAUTION
Cap all hydraulic lines and plug all hydraulic ports to pre-
vent contamination. Failure may result in damage to the
hydraulic system.
NOTE
Place rags under hydraulic connections to catch any hy-
draulic fluid that spills during maintenance. Dispose of
fluid soaked rags in accordance with standard operating
procedures.