TM 9--2350--292--20--2
0371 00--3
BRAKE HYDRAULIC CYLINDER REPLACEMENT (NEW CONFIGURATION
WITH BRAKE MODULATION) -- CONTINUED
0371 00
Installation
1. Install hydraulic cylinder (4) on threaded bracket (13).
2. Secure hydraulic cylinder (4) to threaded bracket (13) with spanner plate (12).
NOTE
Hydraulic cylinder must be flush with spanner plate within
+ 0.06 in. (1.5 mm)
3. Torque spanner plate (12) to 30--35 lb--ft (40.7--47.5 NSm).
4. Tighten nut (10). Torque nut (10) to 30--35 lb--ft (40.7--47.5 NSm).
NOTE
Threads of swivel must be visible through hole in
threaded rod.
5. Install swivel (7) with nut (5) into threaded rod (9).
6. Tighten nut (5) to lock swivel (7) in place. Torque nut (5) to 30--35 lb--ft (40.7--47.5 NSm).
7. Connect brake cable assembly (8) to swivel (7).
8. Tighten nut (6) to lock brake cable assembly (8) to swivel (7).
4
5
6
7
8
9
13
13
10
12
4
