TM 9--2350--292--20--2
0372 00--2
BRAKE ACCUMULATOR REPLACEMENT -- CONTINUED
0372 00
Removal
WARNING
Hydraulic fluid in hose assembly connected to the accu-
mulator is under pressure and can cause personnel inju-
ry. Hose assembly must be loosened only enough to re-
lieve pressure at a very slow rate to avoid injury.
1. Wrap rags around end of hose assembly (1) to stop hydraulic fluid from spraying.
2. Loosen hose assembly (1) only enough to relieve hydraulic pressure.
3. Remove hose assembly (1), adapter (2) and preformed packing (3) from accumulator (4). Discard preformed
packing (3).
4. Remove four screws (5), four lockwashers (6), two clamps (7) and accumulator (4) from hull. Discard lockwash-
ers (6).
5. Inspect parts for damage and replace as required.
FORWARD
3
1
2
6
5
7
4