TM 9--2350--292--20--20386 00--2SOLID RUBBER WHEELS REPLACEMENT -- CONTINUED0386 00Removal1. Loosen, but do not remove 10 self--locking nuts (1) and 10 flat washers (2) securing solid rubber wheels (3) to hubassembly (4).2. Raise track (5) from solid rubber wheels (3).3. Position hydraulic jack (6) under suspension arm spindle (7), raise solid rubber wheels (3) to clear the track (5).4. Remove three center guides (8) ahead of solid rubber wheels (3) to be removed (para 12--14).WARNINGWhen driving vehicle on or off lifter, clear the area. Liftermay fly out from under the vehicle and cause serious inju-ry to personnel.5. Position lifter (9) on suspension arm spindle (7) and ahead of solid rubber wheels (3). Operate vehicle forward toraise solid rubber wheels (3) off of track (5) onto lifter (9) (TM 9--2350--292--10).6. Remove 10 self--locking nuts (1), 10 flat washers (2) and two solid rubber wheels (3) from hub assembly (4). Dis-card locknuts.7. Clean solid rubber wheels (3) with hot soapy water. If available, steam may be used to remove accumulatedgrease and dirt.8. Check solid rubber wheels (3) for gouges, chips, cuts or separation from rim. If separation from rim is severeenough to cause thumping during operation, replace solid rubber wheel.9. Inspect parts for damage and replace as required.Figure 177FORWARD123453673583579ARMOR SKIRTS REMOVED FOR CLARITY
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business