TM 9--2350--292--20--2
0407 00--3
SHIFTING CONTROL LINKAGE (ENGINE COMPARTMENT) REPAIR --
CONTINUED
0407 00
Removal--Continued
9. Remove screw (21) and lockwasher (22), disconnect tube assembly (23) from bell crank (20). Discard lockwasher.
WARNING
10. Remove retaining ring (24) from pin (25). Discard retaining ring.
11. Remove pin (25) and bell crank (20) from mounting bracket (26).
12. Remove two screws (27) and two lockwashers (28) from mounting bracket (26). Discard lockwashers.
13. Remove screw (29), lockwasher (30), flat washer (31) and mounting bracket (26). Discard lockwasher.
14. Remove screw (32) and lockwasher (33), disconnect tube assembly (23) from bell crank (34). Discard lockwasher.
15. Remove screw (35) and lockwasher (36), disconnect threaded rod assembly (37) from
bell crank (34). Discard lockwasher.
Figure 194
21
22
23
20
25
24
27
28
31
30
29
33
32
34
37
35
36
26
FORWARD
