TM 9--2350--292--20--2
AUXILIARY POWER UNIT AUXILIARY HOUSING REPLACEMENT --
CONTINUED
0414 00
Installation--Continued
2. Install auxiliary housing (5) on vehicle hull with three screws (6) and three new lockwashers (7).
3. Install new gasket (4) and exhaust tube (3) on auxiliary housing (5) with two screws (1) and two new lockwashers
(2).
4. Operate personnel heater (TM 9--2350--292--10) and check for exhaust leaks. Make repairs as necessary.
Figure 198
1
2
4
3
5
6
7
NOTE
FOLLOW--ON MAINTENANCE:
Install auxiliary power unit engine air duct
(WP 0620 00 or WP 0621 00)
END OF TASK
0414 00--3/4 blank
