TM 9--2350--292--20--2
0415 00--1
ENGINE DECK GRILLES AND ENGINE DECK ACCESS DOORS
REPLACEMENT
0415 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Endless sling (item 24, WP 0717 00)
Suitable lifting device (1000 lbs (454 kg) min cap)
Materials/Parts
Lockwashers (6) (item 12, WP 0718 00)
Cotter pin (item 206, WP 0718 00)
Equipment Conditions
Boom raised (TM 9--2350--292--10)
For rear access door removal only
Personnel Required
Three
References
TM 9--2350--292--10
NOTE
There are four different types of engine deck grilles and
access doors. This task replaces only one of each type.
Removal
1. Remove two screws (1), two lockwashers (2), two flat washers (3) and engine deck grille (4) from hull. Discard
lockwashers.
2. Remove screw (5), flat washer (6) and lock (7) securing engine deck access door (8) to hull.
3. Remove cotter pin (9), flat washer (10), headed pin (11) and engine deck access door (8) from hull. Discard cot-
ter pin.
Figure 19
1
2
3
4
5
6
7
8
9
10
11
FORWARD
