TM 9--2350--292--20--2
0350 00--1
TRANSMISSION CONTROL ASSEMBLY REPLACEMENT
0350 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (5) (item 2, WP 0718 00)
Cotter pin (item 15, WP 0718 00)
Equipment Conditions
Vehicle parked on level ground
(TM 9--2350--292--10)
Tracks blocked (TM 9--2350--292--10)
Vehicle parking brake set (TM 9--2350--292--10)
Hydraulic control panel, bracket and clamp removed
(WP 0246 00)
References
TM 9--2350--292--10
Removal
WARNING
Vehicle can move when linkage is disconnected. Park
vehicle on level ground and block vehicle tracks. Failure
to comply may result in personnel death or injury or
equipment damage.
NOTE
To aid in installation, make sure adjustment holes have
been pinned before removal of component.
1. Remove cotter pin (1) from straight headed pin (2). Discard cotter pin.
2. Remove straight headed pin (2) securing lever (3) to remote control lever (4).
Figure 192
1
2
3
4
