Installation - TM-9-2350-292-20-2

TRANSMISSION CONTROL ASSEMBLY REPLACEMENT

TRANSMISSION OIL BREATHER, TRANSMISSION OIL BREATHER TUBE, HOSE, FITTINGS AND OIL PRESSURE TRANSMITTER FITTINGS REPLACEMENT

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
13

TM 9--2350--292--20--2 0350 00--2 TRANSMISSION CONTROL ASSEMBLY REPLACEMENT -- CONTINUED 0350 00 Removal -- Continued 3. Remove screw (5) and lockwasher (6) securing lever (7) to remote control lever (8). Discard lockwasher. NOTE Note the quantity and position of shim(s) being removed to ensure shim(s) are installed in the same position. 4. Remove four screws (9), four lockwashers (10), transmission shift control assembly (11) and shim(s) (12) from vehicle deck. Discard lockwashers. 5. Inspect parts for damage and replace as required. Installation 1. Install transmission shift control assembly (11) on vehicle deck with shim(s) (12), four screws (9) and four new lockwashers (10). 2. Secure lever (7) to remote control lever (8) with screw (5) and new lockwasher (6). 3. Secure lever (3) to remote control lever (4) with straight headed pin (2) and new cotter pin (1). 4. Adjust transmission control assembly (WP 0408 00). 5. Lubricate transmission control assembly (11) (WP 0187 00). Figure 192 1 2 3 4 5 6 7 8 9 10 11 12 NOTE FOLLOW--ON MAINTENANCE: Install hydraulic control panel, bracket and clamp (WP 0246 00) END OF TASK

Privacy Statement
Press Release
Contact