TM 9--2350--292--20--20351 00--4TRANSMISSION OIL BREATHER, TRANSMISSION OIL BREATHER TUBE,HOSE, FITTINGS AND OIL PRESSURE TRANSMITTER FITTINGSREPLACEMENT -- CONTINUED0351 00Installation -- Continued5. Apply sealing compound to male pipe threads of elbow (16) to be installed in transmission (19) and elbow (15) tobe installed in breather (5).6. Install elbow (16) in transmission (19) and elbow (15) in breather (5).7. Install breather (5) on transmission (19) with two screws (17) and two new lockwashers (18).8. Install two hose clamps (12 and 9) on hose (14).9. Connect hose (14) to elbow (16) and elbow (15).10. Secure hose clamp (12) to steer oil pressure regulator (13) with new self--locking screw (11).11. Secure hose clamp (9) to control valve body (10) with screw (8).12. Install sleeve (7) and nut (6) in exhaust pipe (4).13. Apply sealing compound to male pipe threads of two elbows (3) to be installed in exhaust pipe (4) and breather(5).14. Install two elbows (3) in exhaust pipe (4) and breather (5).15. Install transmission breather tube (2), tighten two coupling nuts (1).Figure 1631132161415531718761310111289194POWERPACKREMOVED FOR CLARITYNOTEFOLLOW--ON MAINTENANCE:Connect battery power (WP 0256 00)Install engine deck assembly (WP 0417 00)END OF TASK
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
