TM 9--2350--292--20--20353 00--4TRANSMISSION OIL FILTERS REPAIR -- CONTINUED0353 00InstallationWARNING1. Clean 12 screws (1) and 12 transmission screw holes (13) with dry--cleaning solvent.2. Install two new filter elements (6) in transmission (5). Lubricate right side filters preformed packings with lubricant(item 31, WP 0716 00) prior to installation of filter.3. Apply lubricant (item 85, WP 0716 00) to threads of 12 screws (1).4. Install new gasket (4) and transmission filter head (3) on transmission (5) with 12 screws (1) and 12 new lock-washers (2). Torque 12 screws to 25--31 lb--ft (34--42 NSm) in accordance with torque sequence diagram.WARNINGOil sprayed from improperly installed oil filter head as-sembly can cause fire in engine compartment.5. Verify torque to specified limit on each of 12 screws (1). If any screws (1) move during recheck, repeat torqueprocess.Figure 162171112842610953TORQUE SEQUENCE DIAGRAM12312344666651313FILTERSWITHPREFORMEDPACKINGSFILTERSWITHOUTPREFORMEDPACKINGSNOTEFOLLOW--ON MAINTENANCE:Install transmission filter switch,if removed (WP 0352 00)Install transmission breather tube,if removed (WP 0351 00)Install transmission oil cooler lines,if removed (WP 0345 00)Operate engine (TM 9--2350--292--10) and checktransmission filter head for leaks.Install engine deck assembly (WP 0417 00)END OF TASK
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
