TM 9--2350--292--20--2
0354 00--2
OUTPUT REDUCTION UNIT (OUTPUT DRIVE) REPLACEMENT --
CONTINUED
0354 00
Removal--Continued
CAUTION
To prevent damage to brake apply lever, do not dislodge
seals and bearing in end of brake apply lever. Cover end
of brake apply lever with tape after disconnecting brake
rod.
2. At both left and right output drives, remove cotter pin (5) and straight pin (6) with lubrication fitting and disconnect
brake rod clevis (7) from brake apply levers (8). Discard cotter pins.
5
6
7
8
3. At left output drive, remove cotter pin (9) and straight pin (10) and disconnect air valve linkage (11) from bell crank
(12). Discard cotter pin.
Figure 163
9
10
11
12
