TM 9--2350--292--20--2
0354 00--7
OUTPUT REDUCTION UNIT (OUTPUT DRIVE) REPLACEMENT --
CONTINUED
0354 00
Removal--Continued
NOTE
Output drives contain about one gallon of residual oil.
13. To drain residual oil, place a suitable container under output drive (19). Remove lower of two screws (28) holding
brake apply lever stop (29).
14. Replace screw (28) in brake apply lever stop (29), remove screws (24) from output drive housing (26).
15. Remove four preformed packings (large O--rings) (30) in inner and middle grooves on both transmission output
housings (18). Discard preformed packings.
16. Inspect parts for damage and replace as required.
Figure 164
18
28
29
30
24
26
26
19