TM 9--2350--292--20--2
0354 00--11
OUTPUT REDUCTION UNIT (OUTPUT DRIVE) REPLACEMENT --
CONTINUED
0354 00
Installation--Continued
CAUTION
Tie shafts are difficult to move and may require use of a
wrench or screwdriver to turn shaft. Be sure to use a
heavy--duty screwdriver to turn steer tie shaft. Shaft re-
sistance could break a light duty screwdriver shaft inside
transmission, which would require replacement of entire
transmission assembly.
13. Insert screwdriver in left steer clutch housing access hole (34) and engage slot in steer tie shaft.
14. Have associate with screwdriver pry left drive output coupling (17) toward transmission output housing (18) while
you turn steer tie shaft until output coupling and transmission output gears mesh. Slide output coupling into trans-
mission as far as possible, install coupling retainer (16).
15. Repeat step 12 for right drive output coupling.
16. Remove screwdrivers, install access plug (32) in left steer clutch housing (33).
Figure 166
17
18
34
32
33
16