TM 9--2350--292--20--2
OUTPUT REDUCTION UNIT (OUTPUT DRIVE) REPLACEMENT --
CONTINUED
0354 00
Installation--Continued
CAUTION
Do not damage or dislodge seals and bearing in end of
brake apply lever when installing pin.
20. At left output drive, attach lower end of air valve linkage (11) to bell crank (12) with straight pin (10) and new cotter
pin (9).
21. At both left and right output drives, connect brake rod (7) to brake apply lever (8) with straight pin (6) with lubrica-
tion fitting and new cotter pin (5).
22. Install two hull drain covers (4) and two new gaskets (3) with six screws (1) and six new lockwashers (2).
23. Adjust brakes (WP 0355 00 or WP 0356 00 or WP 0357 00).
24. Adjust brake air valve linkage (WP 0384 00).
Figure 213
5
6
7
8
1
2
3
4
12
10
9
11
NOTE
FOLLOW--ON MAINTENANCE:
Install engine deck assembly (WP 0417 00)
Install final drive hub and sprocket
(WP 0397 00)
Connect shifting control linkage
(WP 0407 00)
Connect steering control linkage
(WP 0404 00)
END OF TASK
0354 00--13/14 blank
