TM 9--2350--292--20--2
0354 00--12
OUTPUT REDUCTION UNIT (OUTPUT DRIVE) REPLACEMENT --
CONTINUED
0354 00
Installation--Continued
WARNING
CAUTION
Do not scratch or damage saddle caps. A defective cap
may cause oil leaks after installation. Remove nicks and
burrs prior to installation.
17. Clean saddle caps (15) and screws (13) using dry--cleaning solvent.
18. Apply adhesive uniformly on saddle cap flanges and mounting screws (13).
19. Install saddle caps (15) on both output drives with six screws (13) and six new lockwashers (14). Torque screws
to 83--100 lb--ft (113--136 NSm) (item 2, WP 0717 00).
Figure 166
15
13
14