Google+
Facebook
LinkedIn
Twitter
Digg
StumbleUpon
Home
Download PDF
Order CD-ROM
Order in Print
Installation - TM-9-2350-292-20-2_418
Removal - TM-9-2350-292-20-2_420
TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
382
383
384
385
386
387
388
389
390
391
392
TM 9--2350--292--20--2
0438 00--1
APU DOOR ASSEMBLY AND HOLD--OPEN LATCH REPAIR
0438 00
THIS WORK PACKAGE COVERS:
Removal, Disassembly, Assembly, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Endless sling (item 24, WP 0717 00)
Suitable lifting device (200 lbs (90.8 kg) min cap)
Materials/Parts
Cotter pins (2) (item 5, WP 0718 00)
Cotter pin (item 19, WP 0718 00)
Spring washers (2) (item 294, WP 0718 00)
Cotter pins
(2) (item 71, WP 0718 00)
Lockwashers
(4) (item 2, WP 0718 00)
Equipment Conditions
APU door opened (TM 9--2350--292--10)
For maintenance of APU door assembly only
Personnel Required
Three
References
TM 9--2350--292--10
NOTE
Perform Removal steps 1, 2 and Disassembly step 2 and
Installation steps 6 and 7 for replacement of APU door
assembly.
Perform Removal steps 3 through 6 and Disassembly
step 2 and Installation steps 1 through 5 for maintenance
of APU door assembly hold--open latch.
Removal
1. Attach endless sling and suitable lifting device to APU door assembly (1).
WARNING
2. Remove two
cotter pins
(2), two flat washers (3), two headed pins (4) and APU door assembly (1) from hull. Dis-
card cotter pins.
Figure 217
1
4
2
3
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business