TM 9--2350--292--20--2
0448 00--1
PERSONNEL AND MECHANIC’S CAB TOP DOOR ASSEMBLY REPAIR
0448 00
THIS WORK PACKAGE COVERS:
Removal, Disassembly, Assembly, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Endless sling (item 24, WP 0717 00)
Suitable lifting device (250 lbs (113.5 kg) min cap)
Retaining pliers set (item 15, WP 0717 00)
Materials/Parts
Self--locking nuts (2) (item 153, WP 0718 00)
Lockwashers (11) (item 2, WP 0718 00)
Rubber strip (item 154, WP 0718 00)
Self--locking nut (item 155, WP 0718 00)
Cotter pin (item 53, WP 0718 00)
Retaining rings (2) (item 156, WP 0718 00)
Rubber based adhesive (item 15, WP 0716 00)
Safety goggles (item 93, WP 0716 00)
Materials/Parts--Continued
Seal (item 242, WP 0718 00)
Dry--cleaning solvent (item 1, WP 0716 00)
Gasket (item 446, WP 0718 00)
Cushioning pad (item 157, WP 0718 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Personnel
Three
References
TM 9--2350--292--10
Removal
1. Raise cab top door (1) approximately two inches to align two self--locking nuts (2) with opening in shaft housing
assembly (3).
WARNING
2. Attach sling and suitable lifting device to cab top door (1), remove slack from sling ensuring two self--locking nuts
(2) are aligned with opening in shaft housing assembly (3).
Figure 228
1
2
3
MECHANIC’S CAB TOP DOOR
PERSONNEL CAB TOP DOOR
