TM 9--2350--292--20--2
0447 00--3
DRIVER’S CAB TOP DOOR ASSEMBLY REPAIR -- CONTINUED
0447 00
Disassembly
1. Remove door rubber strip (9) from cab top door (1). Discard door seal.
2. Remove adjusting screw (10) and self--locking nut (11) from control arm (6). Discard self--locking nut.
3. Remove cotter pin (12), flat washer (13), pin (14), retaining latch (15) and spring (16). Discard cotter pin.
4. Remove spring (17) from shaft housing assembly (3).
WARNING
5. Remove retaining ring (18), retainer (19), bearing (20) and disc (21). Discard retaining ring.
6. Remove retaining ring (22), two bushings (23) and seal (24) from shaft housing (25). Discard retaining ring and
seal.
7. Inspect parts for damage and replace as required.
Figure 225
21
20
19
18
22
23
25
23
24
14
16
17
3
12
15
13
9
1
10
6
11
