TM 9--2350--292--20--2
0447 00--4
DRIVERS CAB TOP DOOR ASSEMBLY REPAIR -- CONTINUED
0447 00
Assembly
WARNING
1. Install new seal (24), two bushings (23) and new retaining ring (22) in shaft housing (25).
2. Install disc (21), bearing (20), retainer (19) and new retaining ring (18).
3. Install spring (17) in shaft housing assembly (3).
4. Install spring (16), retaining latch (15), pin (14), flat washer (13) and new cotter pin (12).
5. Install adjusting screw (10) and new self--locking nut (11) on control arm (6).
WARNING
6. Clean door rubber strip mating surfaces with dry--cleaning solvent.
7. Apply adhesive to new door rubber strip (9) and rubber strip mating surface on cab top door (1).
8. Install new door rubber strip (9) on cab top door (1).
Figure 225
21
20
19
18
22
23
25
23
24
14
16
17
3
12
9
1
10
6
11
15
13