TM 9--2350--292--20--2
0447 00--1
DRIVER’S CAB TOP DOOR ASSEMBLY REPAIR
0447 00
THIS WORK PACKAGE COVERS:
Removal, Disassembly, Assembly, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Endless sling (item 24, WP 0717 00)
Suitable lifting device (250 lbs (113.5 kg) min cap)
Retaining pliers set (item 15, WP 0717 00)
Materials/Parts
Self--locking nuts (2) (item 153, WP 0718 00)
Lockwashers (5) (item 2, WP 0718 00)
Rubber strip (item 154, WP 0718 00)
Self--locking nut (item 155, WP 0718 00)
Cotter pin (item 53, WP 0718 00)
Retaining rings (2) (item 156, WP 0718 00)
Adhesive (item 15, WP 0716 00)
Seal (item 242, WP 0718 00)
Dry--cleaning solvent (item 1, WP 0716 00)
Safety goggles (item 93, WP 0716 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Driver’s passive night viewer mount assembly
removed (WP 0446 00)
Personnel
Three
References
TM 9--2350--292--10
Removal
1. Raise cab top door (1) approximately two inches to align two self--locking nuts (2) with opening in shaft housing
assembly (3).
WARNING
2. Attach endless sling and suitable lifting device to cab top door (1), remove slack from endless sling ensuring two
self--locking nuts (2) are aligned with opening in shaft housing assembly (3).
Figure 225
1
2
3
