TM 9--2350--292--20--2
0446 00--1
DRIVER’S PASSIVE NIGHT VIEWER MOUNT ASSEMBLY REPAIR
0446 00
THIS WORK PACKAGE COVERS:
Removal, Disassembly, Assembly, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Endless sling (item 24, WP 0717 00)
Suitable lifting device (100 lbs (45.4 kg) min cap)
Materials/Parts
Self--locking screws (2) (item 161, WP 0718 00)
Self--locking screws (4) (item 162, WP 0718 00)
Self--locking screws (2) (item 163, WP 0718 00)
Self--locking screws (3) (item 164, WP 0718 00)
Gasket (item 59, WP 0718 00)
Materials/Parts--Continued
Gasket (item 243, WP 0718 00)
Rubber strip (item 244, WP 0718 00)
Rubber based adhesive (item 15, WP 0716 00)
Adhesive (item 17, WP 0716 00)
Equipment Conditions
Driver’s cab top door opened (TM 9--2350--292--10)
Personnel
Three
Removal
NOTE
Screw lengths and plate size are different. Note location
to aid during Installation
1. Remove six self--locking screws (1) and three plates (2) from driver’s cab top door (3). Discard self--locking
screws.
2. Attach endless sling and suitable lifting device to night viewer mount assembly (4).
3. Remove night viewer mount assembly (4) and gasket (5) from driver’s cab top door (3). Discard gasket.
Figure 225
1
2
3
4
5
1
2
2
