TM 9--2350--292--20--2
0446 00--2
DRIVER’S PASSIVE NIGHT VIEWER MOUNT ASSEMBLY REPAIR --
CONTINUED
0446 00
Disassembly
NOTE
Block and screw sizes are different. Note location to aid
during Installation
1. Remove two screws (6), two self--locking screws (7), two blocks (8) and cover (9) from plate (10). Discard self--
locking screws.
2. Remove setscrew (11), pin (12) and door assembly (13) from plate (10).
3. Remove gasket (14) from door assembly (13). Discard gasket.
4. Remove three self--locking screws (15), three flat washers (16) and handle assembly (17) from plate (10). Dis-
card self--locking screws.
5. Remove rubber strip (18) from plate (10). Discard rubber strip.
6. Inspect parts for damage and replace as required.
Figure 226
9
12
13
14
11
10
18
17
16
15
8
6
7
8
6
