TM 9--2350--292--20--2
0461 00--9
DRIVER’S AND MECHANIC’S SEAT REPAIR -- CONTINUED
0461 00
Assembly
1. Install nut (113), clevis (112) and nut (111) on shaft (114).
2. Install spacer (109), spring (108), flat washer (107) and new headless grooved pin (106) on clevis end (110).
3. Install clevis assembly (105) and lever (104) with two pins (103) and two new X--washers (102) on adjusting as-
sembly (67).
4. Install shouldered stud (101) with new lockwasher (100) and nut (99) on adjusting assembly (67).
5. Install bell crank (95) with flat washer (98), new lockwasher (97) and nut (96) on adjusting assembly (67).
6. Connect shaft (114) with pin (94) and new cotter pin (93).
7. Install rod (92) with pin (91) and new cotter pin (90).
8. Install remote control lever (51) with pin (89) and new cotter pin (88).
51
89
92
91
90
96
97
98
94
93
102
111
104
103
103
109
108
107
106
110
105
113
114
99
100
101
95
67
112
88
