TM 9--2350--292--20--2
0461 00--10
DRIVER’S AND MECHANIC’S SEAT REPAIR -- CONTINUED
0461 00
Assembly--Continued
9. Install lever (86) on shaft (87) with new headless grooved pin (85).
10. Install lock--release lever assembly (79) with pin (84) and new X--washer (83).
11. Install spacer (82), spring (81), flat washer (80), lock--release lever assembly (79) and new headless grooved pin
(78) on adjusting assembly (67).
12. Install shim(s) (77) and side roller (76) with two screws (74) and two new lockwashers (75) on adjusting assembly
(67).
13. Install four bearings (73) and four new plain encased seals (72) on adjusting assembly (67). Stake securely, three
stakes equally spaced on both ends.
67
73
72
76
75
77
79
82
81
87
78
80
86
84
85
83
74
