TM 9--2350--292--20--2
0532 00--1
PERSONNEL HEATER EXHAUST HOSE/TUBE ASSEMBLY AND INSULATION
BLANKET REPLACEMENT
0532 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (6) (item 2, WP 0718 00)
Gasket (item 24, WP 0718 00)
Gasket (item 25, WP 0718 00)
Nonelectrical wire (item 101, WP 0716 00)
Equipment Conditions
Boom raised (TM 9--2350--292--10)
APU cooling air shield removed (WP 0413 00)
For exhaust tube only
APU auxiliary housing removed (WP 0414 00)
For exhaust hose or insulation blanket
References
TM 9--2350--292--10
NOTE
Perform Removal steps 1 and 4 and Installation steps 3
and 4 for maintenance of exhaust tube.
Perform Removal steps 2 and 4 and Installation step 2
for replacement of insulation blanket.
Perform Removal steps 2 through 4 and Installation steps
1, 2 and 4 for maintenance of exhaust hose.
WARNING
Removal
1. Remove two screws (1), two lockwashers (2), exhaust tube (3) and gasket (4) from outer bulkhead. Discard lock-
washers and gasket.
1
2
4
3