TM 9--2350--292--20--2
0529 00--3
PERSONNEL HEATER ASSEMBLY REPLACEMENT -- CONTINUED
0529 00
Installation
1. Install deflector (21) on heater assembly (6) with two screws (19) and two new lockwashers (20).
2. Install clamp (8) on heater assembly (6). Torque screw (18) to 90--95 lb--in. (10--11 N m).
3. Install two saddles (17), two clamps (13) and two clamps (14) in hull with four screws (15) and four new lock-
washers (16).
4. Position heater assembly (6) in hull, tighten two clamps (13) and two clamps (14).
5. Install air duct hose (12) on heater assembly (6) and tighten clamp (11).
Figure 286
12
11
17
13
6
13
14
21
19
20
14
18
8
15
16
17
16
15
