PERSONNEL HEATER ASSEMBLY REPLACEMENT

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
658

TM 9--2350--292--20--2 0529 00--1 PERSONNEL HEATER ASSEMBLY REPLACEMENT 0529 00 THIS WORK PACKAGE COVERS: Removal, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Torque wrench (item 21, WP 0717 00) Suitable container (1.0 gal. (3.8 L) min cap) Materials/Parts Lockwashers (4) (item 2, WP 0718 00) Lockwashers (2) (item 18, WP 0718 00) Equipment Conditions Vehicle MASTER switch OFF (TM 9--2350--292--10) Battery power disconnected (WP 0256 00) Right side portable fire extinguisher bracket removed (WP 0472 00) Right side gas particulate filter and frame removed (WP 0706 00) References TM 9--2350--292--10 WARNING Removal 1. Close fuel shutoff cock (1). 2. Place suitable container under fuel tube (2) to catch spilled fuel. 3. Disconnect fuel tube (2) from elbow (3). 4. Remove cover (4), elbow (3) and nipple (5) from heater assembly (6). 5. Loosen screw (7) securing clamp (8) to exhaust pipe (9). 6. Disconnect electrical wiring harness 4W124 connector P2 (10) from heater assembly (6). Figure 286 1 2 3 4 5 10 8 9 7 6

Privacy Statement
Press Release
Contact