TM 9--2350--292--20--2
DEFUEL COMPARTMENT DATA PLATE REPLACEMENT
0539 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Electric portable drill (item 11, WP 0717 00)
Twist drill set (item 12, WP 0717 00)
Materials/Parts
Drive screws (16) (item 1, WP 0718 00)
Equipment Conditions
Defuel access door opened (TM 9--2350--292--10)
References
TM 9--2350--292--10
NOTE
The defuel compartment contains four data plates. This
procedure applies to all four data plates.
Removal
1. Remove heads from four drive screws (1). Discard drive screws.
2. Remove data plate (2, 3, 4 or 5) from compartment wall.
3. Drill out four drive screw (1) shanks.
4. Inspect parts for damage and replace as required.
Installation
Position data plate (2, 3, 4 or 5) over mounting holes in compartment wall and install four new drive screws (1).
Figure 301
1
2
3
4
5
1
1
1
NOTE
FOLLOW--ON MAINTENANCE:
Close defuel access door (TM 9--2350--292--10)
END OF TASK
0539 00--1/2 blank
