TM 9--2350--292--20--2
FUEL TANK FILLER ACCESS COVER DATA PLATE REPLACEMENT
0541 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Electric portable drill (item 11, WP 0717 00)
Twist drill set (item 12, WP 0717 00)
Materials/Parts
Drive screws (6) (item 1, WP 0718 00)
Equipment Conditions
Fuel tank filler access cover removed (WP 0435 00)
Removal
1. Remove heads from four drive screws (1). Discard drive screws.
2. Remove data plate (2) from fuel tank filler access cover (3).
3. Drill out four drive screw (1) shanks.
4. Inspect parts for damage and replace as required.
Installation
Position data plate (2) over mounting holes on fuel tank filler access cover (3) and install four new drive screws (1).
Figure 214
1
2
3
NOTE
FOLLOW--ON MAINTENANCE:
Install fuel tank filler access cover (WP 0435 00)
END OF TASK
0541 00--1/2 blank