TM 9--2350--292--20--2
0587 00--17
AUXILIARY POWER UNIT ASSEMBLY REPLACEMENT (HATZ) -- CONTINUED
0587 00
Installation--Continued
NOTE
Perform the following steps to connect vehicle electrical
wiring to APU assembly.
19. Install screw (13), new lockwasher (14) and cable clamp (15) to bulkhead behind APU engine air duct (12). Wire
circuit numbers 62 and 66 from wiring harness 3W711 and 493, 420 and 420A from wiring harness 3W704 are
routed through cable clamp (15).
20. Install screw (9), two new lockwashers (10) and APU GND lead (11) to bulkhead behind APU engine air duct (12).
12
10
11
10
9
14
13
15
