TM 9--2350--292--20--2
0617 00--3
AUXILIARY POWER UNIT FUEL SYSTEM LINES AND FITTINGS
REPLACEMENT (HATZ) -- CONTINUED
0617 00
Removal--Continued
8. Remove hose (23) from fitting (24) (TM 9--2815--250--24&P).
9. Remove fluid passage bolt (25), two flat washers (26), fitting (24), straight tube adapter (27), gasket (28), banjo
fitting (29) with hose (21), two gaskets (30) and spacer (31). Discard gaskets.
NOTE
Hose fittings are barbed. Perform step 10 only if replac-
ing hose or barbed fittings.
10. Separate barbed fitting (22) and banjo fitting (29) from hose (21). Remove clamps (20 and 32).
31
30
29
24
27
25
26
23
28
32
20
22
21