TM 9--2350--292--20--2
0617 00--4
AUXILIARY POWER UNIT FUEL SYSTEM LINES AND FITTINGS
REPLACEMENT (HATZ) -- CONTINUED
0617 00
Removal--Continued
11. Remove screw (33), lockwasher (34) and loop clamp (35) securing hose (36). Discard lockwasher.
12. Remove quick--disconnect coupling half (37) from barbed fitting (38).
13. Loosen hose clamp (39) and remove hose (36) with barbed fitting (38) and hose clamp (40) from hose nipple (41).
NOTE
Hose fittings are barbed. Perform step 14 only if replac-
ing hose or barbed fittings.
14. Loosen hose clamp (40) and separate barbed fitting (38) from hose (36).
15. Inspect parts and replace as required.
39
33
34
35
36
37
38
40
41
