TM 9--2350--292--20--2
0617 00--6
AUXILIARY POWER UNIT FUEL SYSTEM LINES AND FITTINGS
REPLACEMENT (HATZ) -- CONTINUED
0617 00
Installation--Continued
7. Install two clamps (20 and 32), banjo fitting (29) and barbed fitting (22) on hose (21), if removed. Secure hose
(21) to banjo fitting (29) with clamp (32).
8. Install new gasket (28), banjo fitting (29) with hose (21), two new gaskets (30) and spacer (31) on straight tube
adapter (27). Install straight tube adapter (27) on APU.
9. Install two flat washers (26) and fitting (24) on fluid passage bolt (25). Install fluid passage bolt (25) in straight
tube adapter (27).
10. Install hose (23) on fitting (24) (TM 9--2815--250--24&P).
31
30
29
24
27
25
26
23
28
32
20
22
21
