TM 1-1680-320-13&P
0014 00
CLEANING CABLE HOOK ASSEMBLY
WARNINGS
Perform all cleaning in a well lit, clean, and properly ventilated room.
Cleaning solvent is combustible and toxic to eyes, skin, and respiratory tract.
Wear protective gloves and goggles/face shield. Avoid repeated or prolonged
contact. Use only in well ventilated areas (or use approved respirator as
determined by local safety/industrial hygiene personnel). Keep away from
open flames or other sources of ignition.
Use approved personnel protective equipment (goggles/face shield) when
using compressed air. Air pressure is restricted to a maximum of 35 psi. Do
not direct air stream towards self or other personnel as injury may occur.
CAUTION
Do not allow parts to remain in cleaning solvent for extended periods of time or
rust spots may form. If parts are not to be inspected immediately after cleaning,
spray them with WD-40.
Wash components in Cleaning Solvent and rinse thoroughly. Dry using compressed air.
