TM 1-1680-320-13&P
0016 00
6. Insert cable into winch housing (4), over top of drum (5), and wrap cable once around drum (5).
NOTE
Use a flat tip screwdriver or equivalent to aid in seating cable and ball.
7. Insert cable ball into cable retainer (1) slot.
8. Install cable retainer (1) using holding screw (2) or locally manufactured tool (see WP 0037 00).
9. Ensure cable (3) is seated in proper groove.
10. Tighten cable retainer setscrew.
11. Remove holding screw (2) or special tool.
12. Install pressure roller assembly (6) using special tool (WP 0037 00) and pressure roller springs (7).
13. Connect power to hoist.
0016 00-10
