TM 1-1680-320-13&P
0017 00
HIGH PERFORMANCE RESCUE HOIST ASSEMBLY
CABLE CUTTER ASSEMBLY - REMOVAL
INITIAL SETUP
Personnel Required: 1
References:
UH-1: 15N, Helicopter Repairer
AVUM/AVIM Manual for General Aircraft
UH-60: 15T, Helicopter Repairer
Maintenance TM 1-1500-204-23 series
Hoist Certified: 91W, Flight Medic
Cleaning and Corrosion Control Manual
TM 1-1500-344-23 series
Parts/Materials:
Munitions, Restricted or Suspended
N/A
TB 9-1300-385, Appendix D
Tools and Special Tools:
N/A
WARNING
Ensure external electrical power is removed from system prior to removing cable
cutter assembly. Activated electricity could cause injury to personnel or damage
to equipment.
1. Ensure external electrical power is removed.
2. Cut lockwire from cable cutter electrical connector (1), discard lockwire.
3. Disconnect electrical connector (1).
