TM 1-1680-320-13&P
0017 00
HIGH PERFORMANCE RESCUE HOIST ASSEMBLY
CABLE CUTTER ASSEMBLY - P/N 42277E336
INITIAL SETUP
Personnel Required: 1
References:
UH-1: 15N, Helicopter Repairer
AVUM/AVIM Manual for General Aircraft
UH-60: 15T, Helicopter Repairer
Maintenance TM 1-1500-204-23 series
Hoist Certified: 91W, Flight Medic
Cleaning and Corrosion Control Manual
TM 1-1500-344-23 series
Parts/Materials:
Munitions, Restricted, or Suspended
Abrasive Cloth (WP 0047 00, Table 1, Item 1)
TB 9-1300-385, Appendix D
Cleaning Solvent (WP 0047 00, Table 1, Item 12)
Low-lint Cloth (WP 0047 00, Table 1, Item 13)
Lockwire (WP 0047 00, Table 1, Item 21)
Petrolatum (WP 0047 00, Table 1, Item 27)
Tools and Special Tools:
Tool Set, Aviation Unit Maintenance
NSN 4920-00-567-0476
DISASSEMBLY
1. Cut lockwire and remove and discard cartridge (2) and packing (3) from cable cutter assembly (1).
2. Insert screwdriver into threaded end of barrel (6) and push cable cutter (4) from barrel (6).
3. Discard cable cutter (4) and packing (5).
4. Remove and discard shear screw (7).
