TM 9-2350-238-10
Table 3-1. TROUBLESHOOTING–CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TRANSMISSION–CONTINUED
12. OIL PRESSURE TOO LOW OR TOO HIGH–CONTINUED.
Step 3.
Incorrect grade of oil.
Drain transmission and refill with correct grade of oil (appx G). If
warning horn continues to sound or oil pressure gauge continues
read too high a pressure, notify unit maintenance personnel.
13. OIL TEMPERATURE TOO HIGH.
to
Step 1.
Check to see if transmission oil is low,
Open transmission access door and check oil level. Level should be
within operating range on dipstick (1). Add oil as required (appx G).
Step 2.
Check and make sure fan well deck is not covered and check radiators for
obstructions and accumulated dirt.
Remove obstructions. Remove engine deck and check radiators. If
radiators are clogged with dirt, notify unit maintenance personnel.
3-16
Change 3
