TM 9-2350-238-10
Table 3-1. TROUBLESHOOTING–CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3-12
ENGINE-CONTINUED
6. ENGINE OVERHEATS.
Step 1.
Check to see if engine coolant level is low and if leaks are visible.
Check to see if low engine coolant warning light is on. Fill radiators
with coolant as required. If leaks are visible, notify unit maintenance
personnel.
Step 2. Check to see if radiator cap seal is damaged.
Notify unit maintenance personnel if cap is damaged.
Step 3. Check to see if engine oil is low.
Open engine access door and check engine oil level. Oil level should
be between low (L) and full (F) mark on dipstick (1). If required,
remove cap (2) and add oil (appx G).
Change 3
