TM 9-2350-238-10
Table 3-1. TROUBLESHOOTING–CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ENGINE–CONTINUED
8. LOW OR NO OIL PRESSURE.
Step 1.
Check to see if engine oil is low.
Open engine access door and check engine oil level. Oil level should
be between low (L) and full (F) mark on dipstick (1). If required,
remove cap (2) and add oil (appx G).
Step 2.
Check for dirty oil or foam on oil dipstick (1).
If dirty, drain engine oil, and refill (appx G). If foam is evident, notify
unit maintenance personnel,
9. HIGH OIL PRESSURE.
Incorrect grade of oil.
Drain engine oil and refill with correct weight oil (appx G).
10. ENGINE WILL NOT SHUT DOWN.
Check for loose or disconnected engine shutdown control linkage,
Open access door in engine deck and manually push engine shut-
down lever at governor toward driver’s compartment, Notify unit
maintenance personnel,
3 - 14
Change 3
