INSPECTION/REPAIR - TM-9-2350-238-34-2

TM-9-2350-238-34-2 Recovery Vehicle Full-Tracked: Light Armored M578 (2350-00-439-6242) Manual
Page Navigation
157

6 7 8 9 Remove four plugs (13) and four pre- formed packings (14) from three-spool directional linear valve housing (3). Remove four preformed packings from four plugs. Remove two plugs (15) with attached parts from three-spool directional linear valve housing (3). Remove four retainers (16) and four pre- formed packings (17) from two plugs (15). Remove three plugs (18) and three pre- formed packings (19) from three-spool directional linear valve housing (3). Re- move three preformed packings from three plugs. INSPECTION/REPAIR 1 Inspect for broken, damaged, or missing parts. 2 If three-spool directional linear valve hous- ing is broken, damaged, or missing, repair is by replacement of next higher assem- bly. 3 If any kit component is damaged, replace entire three-spool valve parts kit. 4 Repair is by replacement of authorized parts (TM9-2350-238-24P-2). 2 3 4 5 6 7 8 9 TM 9-2350-238-34-2 Install three new preformed packings (19) on three plugs (18). Install three plugs (18) in three-spool di- rectional linear valve housing (3). install four new preformed packings (17) and four new retainers (16) on two plugs (15). Install two plugs (15) in three-spool direc- tional linear valve housing (3). Install four new preformed packings (14) on four plugs (13). Install four plugs (13) in three-spool direc- tional linear valve housing (3). Install three new preformed packings (12), three new valve spool wipers (11), and three new seal packing retainers (10) in three-spool directional linear valve housing (3). Install three new preformed packings (9) and three seal retainers (8) in three-spool directional linear valve housing (3). 10 Install two spools (7) and spool (6) in three-spool directional linear valve housing (3). 11 Install three new retainers (5) and six new assembled screws (4) on three-spool di- rectional linear valve housing (3). 12 Install three covers (2) and six assembled screws (1) on three-spool directional linear valve housing (31. REASSEMBLY 1 Apply engine oil (item 15, appx B) to pre- formed packings (19, 17, 14, 12, and 9), spools (7 and 6), seal retainers (8), re- tainers (16), and seal packing retainers (10). 2-153

Privacy Statement
Press Release
Contact