TM 9-2350-238-34-2
10
11
12
13
14
15
Remove two hexagon head capscrews
(10), two lockwashers (11), outer seal
retaining strap (12), and turret keeper
plate (13).
Remove seal retaining ring (14) and seal
assembly (15).
If damaged, peel seal assembly (15) from
seal retaining ring (14).
Make sure that bearing surfaces are
not damaged while lifting outer race.
Using hoist, carefully lift outer race (4)
from inner race (16).
Place outer race (4) on level surface and
remove sling and eye lifting bolts.
Using suitable sling, turn outer race (4)
over with threaded holes down.
2-273