TM 9-2350-238-34-2
2 - 5 1.
MAINTENANCE OF TURRET BEARING INSTALLATION–PLAIN BEARING UNIT
AND OUTER RACE ASSEMBLY (CONT).
REASSEMBLY (CONT)
15 Using retainer adapter and socket
wrench, install turret bearing assembly
plug retainer (9) in outer race (1). Torque
turret bearing assembly plug retainer to
150 ft-lb (203 N-m).
16 Install new Iockwasher (10) and hexagon
head capscrew (11). Torque hexagon
head capscrew to 150 ft-lb (203 N-m).
17
If removed, install new turret bearing
identification plate (12) by drilling three
holes, 0.052 in. (0.132 cm) in diameter
and 0.32 in. (0.813 cm) deep, next to
identification plate on the outer race (1)
and securing with three new drive
screws (13).
2-278
